Rolă 500m cablu UTP Cat.6a NETSET U/UTP 6A B2ca s1a,d1,a1 LSOH

NETSET cables are compliant with the Construction Products Regulation (CPR) and EN 50575 harmonized European standard that specifies reaction to fire performance requirements, test and assessment methods for electric cables for use in construction works.The requirements for using cables with a specific reaction to fire class in a given type of building should be based on a risk analysis made by the installation designer or other national formal and legal documents. The CPR Directive does not impose on the EU Member States the requirements for types of buildings and associated cables with specific fire reaction classes. The reaction to fire class of cables and other conductors installed within escape routes should not be less than B2ca-s1b, d1, a1.According to guidelines of the Association of Polish Electrical Engineers guidelines, CPR class B2ca cable must be installed in escape routes:high-rise buildings (WW) with a height of more than 55 m above ground levelhigh-rise buildings (W) with a height of more than 25 m to 55 m above ground level or residential buildings with the number of floors above ground level from 9 to 18 inclusivebuildings in human risk category ZL I with rooms intended for simultaneous presence of more than 50 people who are not permanent users, and not intended primarily for use by people with reduced mobilitybuildings in human risk category ZL II – intended primarily for use by people with reduced mobility, such as hospitals, nurseries, kindergardens, nursing homesbuildings in human risk category ZL III – commercial buildings not classified unser ZL I and ZL IIbuildings in human risk category ZL IV – residentialBuildings in human risk category ZL V – collective residence not classified under ZL I and ZL IIPM and IN buildings (production buildings, warehouses, livestock etc.).Declaration of performance (.pdf)NETSET U/FTP 6A is a top quality indoor FTP CAT 6A twisted-pair cable designed for use in professional computer networks inside buildings. Shielding layers made of aluminum foil minimize crosstalk between pairs and interference with the external environment.Key features of the NETSET U/UTP Category 6A E1618 twisted pair cable: top quality materials, made to tight specifications, proven with a 15-year quality guarantee, parameters by far exceeding the requirements of category 6A pre-production quality control of raw materials and post-production quality control of the finished product, meter marker, single stranded copper conductors with a diameter of Ø 0.565 mm (23 by AWG), conductor insulation made of polyethylene Skin-foam-skin PE, conductor insulation colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue, insulated conductors twisted in pairs, cable sheath made of LSZH, outer diameter Ø 7.5 mm, error in printing meter max. 0.5%.The NETSET U/UTP cat. 6A E1618 twisted pair cable has been manufactured in accordance with the standards: General requirements for category 6AISO/IEC 11801:2011 (Ed. 2.2)IEC 61156-5:2012 (Ed. 2.1)EN 50173-1:2011EN 50173-2:2007 A1:2010EN 50288-10-1:2012ANSI/TIA-568-C.2:2009 Flammability standardsIEC 60332-1-1:2015 (Ed. 1.1) / IEC 60332-1-2:2015 (Ed. 1.1)IEC 60754-1:2011 (Ed. 3.0) / IEC 60754-2:2011 (Ed. 2.0)IEC 61034-1:2013 (Ed. 3.1) / IEC 61034-2:2013 (Ed. 3.1) Reaction to fireClassification B2ca-s1a-d1-a1EN 50575:2014 including amendment A1:2016EN 60332-1-2:2004 including amendment A1:2015EN 13501-6:2014The cable comes with a 15-year warrantyThe manufacturer guarantees the stability of parameters for at least 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions.The NETSET U/UTP Category 6A E1617 twisted pair cable is intended for use in an environment with temperature from -30oC to 50 oC. Installation temperature not lower than 0oC and not higher than 50oC. The bending radius should not be less than 8 times the outside diameter.Test results Return Loss Frequency [MHz] Result [dB] 1 20 4 23 8 24.5 10 25 16 25 20 25 25 24.3 31.25 23.6 62.5 21.5 100 20.1 200 18 250 17.3 300 16.8 500 15.2 The return loss graph of the cable compared with the EN 50173 standard. Attenuation Frequency [MHz] Result [dB/100m]   1 2.1   4 3.8   8 5.3   10 5.9   16 7.5   20 8.4   25 9.4   31.25 10.5   62.5 15   100 19.1   200 27.6   250 31.1   300 34.3   500 45.3   NEXT Frequency [MHz] Result [dB] 1 74.3 4 65.3 8 60.8 10 59.3 16 56.2 20 54.8 25 53.3 31.25 51.9 62.5 47.4 100 44.3 200 39.8 250 38.3 300 37.1 500 33.8 The NEXT (near end crosstalk) graph of the cable compared with the EN 50173 standard. PSNEXT Frequency [MHz] Result [dB] 1 72.3 4 63.3 8 58.8 10 57.3 16 54.2 20 52.8 25 51.3 31.25 49.9 62.5 45.4 100 42.3 200 37.8 250 36.3 300 35.1 500 31.8 The PSNEXT (power sum near end crosstalk) graph of the cable compared with the EN 50173 standard. ELFEXT Frequency [MHz] Result [dB] 1 68 4 56 8 49.9 1