RACK board ZMD-2 - Placă de montaj universală

RACK board allows installers to make use both of the front and side surfaces of 19" RACK cabinets, which are accessible after dismantling the side walls. The solution enables unprecedented volume filling factor of the cabinets, while maintaining good access to all signal distribution devices, with proper ventilation, connection transparency, application of patch panels to connect all inbound and outbound cables. All the features make it easy for technicians to diagnose the network during operation.Detailed information on the RACK board vertical mounting system is available here.To mount the ZMB panels, it is necessary to use the ZMC front panels. The width of the ZMC panel is specially designed to enable the application of the ZMB panels on the side surfaces of the rack cabinet.Front assembly component ZMD-2 R77322 is composed of two elements. It is used to mount the devices in a RACK cabinet vertically, 100 mm behind the front 19" rails. This is a universal model. The holes needed to mount a device should be drilled according to needs. The set includes eight screws with caged nuts used to install the elements in the cabinet. Example application of the ZMD-2 front assembly component in the RACK board system: FTTH optical node TERRA OD-005P R81760 Principalele caracteristici ale plăcii RACK board sistem de montare verticală: Predefined installation sets for individual equipment configurations enable simple and quick assembly. RACK board mounting panels allow for installing the equipment items and cables so that the components are placed in a clear and aesthetic way. The highly professional solution ensures that the longer cables are hidden in the middle part of the cabinet, whereas the connections and the devices are easily available (in opposite to placing such devices horizontally). This improves the equipment cooling and facilitates measurement and adjustment procedures. The RACK board system is a universal solution - originally dedicated for Terra equipment, it can be easily adopted for use in GSM (repeaters), network (routers and switches) and other applications. Because every device in the RACK board system is placed vertically and it does not adhere to any other device or element of the RACK cabinet, it is naturally cooled by the air circulation inside the cabinet. Each device has its own mounting panel and the spaces between devices allow for easy wiring. Hardware components of RACK board system: ZMB series - side assembly components for installing on the side surfaces of large standing cabinets. Currently, we offer panels for mounting in 800 x 600 cabinets. ZMC series - front assembly components that can be installed together with ZMB panels. ZMD series - front assembly components for hanging or standing cabinets (cannot be used with ZMB series due to 19'' width). With the RACK board system the installer can make use not only of the front of a RACK cabinet (rails with 19" spacing) but also of the side spaces - the access to those devices is obtained by dismantling side walls of the RACK. The ZMB side assembly is mounted (on the left and/or right side) to the front and rear RACK rail. Currently we offer the ZMB-1-800 assembly for 600x800 mm standing RACK cabinets. The installer can use ZMC front-mount assemblies in several versions. They allow for installing in the front part of the cabinet both the 19’’ standard devices but also other equipment mounted on the EURO TH35 rail or on vertical planes. The elements of the RACK board system are mounted to RACK rails with the included M6 screws and caged nuts. The elements of the RACK board system are made of hard aluminum sheets PA11 (DIN, ISO: AlMg3), powder painted in RAL9004 color. If the prepared mounting holes do not fit the mounted equipment, it is easy to drill new ones. The ZMD components can be used in standing or hanging cabinets, but they cannot be used together with ZMB components that take the whole 19" width. The cables providing signals from antennas are connected to the patch panel with F connectors which, via bridges, transmits the signals to a next patch panel and the required devices. By taking the connection bridges, the installer/technician can measure the input signal in any path. All outbound cables are also connected to panels with F connectors. Each connector can be marked with the number of the corresponding apartment, which helps to perform diagnostics of the whole distribution network, beginning with the measurements of the output signals. Tip produs RACK mounting accessories Serie RACK board Nume ZMD-2 Montaj Instalarea dispozitivelor Set universal 440 mm Material Aluminiu PA11 Culoare RAL 9004 Dimensiuni mm 483 × 43 × 100 grosime mm 2 (carrier) Înălțimea șinei U 1 Dimensiuni de montaj '' 19 Greutate kg 0,5