RACK board ZMB-1-800 - Placă de montaj cu instalare în lateral (pentru cabinete metalice de 600x800 cu pereți detașabili…

Sistemul de prindere RACK board permite instalatorilor să monteze un număr considerabil mai mare de echipamente prin folosirea ambelor suprafețe laterale în interiorul RACK-ului. Această opțiune oferă un spațiu de montaj fără precedent asigurând în același timp acces optim la echipamente, ventilație adecvată și organizare corespunzătoare a traseelor de cablu. Toate aceste caracteristici fac Informații detaliate despre sistemul de montaj vertical al echipamentelor electronice în RACK-urile standard de 19" puteți citi aiciSide assembly component ZMB-1-800 R77105 is used for mounting devices vertically in a RACK cabinet with detachable side walls. The component is mounted to the front and rear RACK rail (on the left or right side of the cabinet). The component is suitable for mounting in standing 600 x 800 mm RACK cabinets with removable side walls - it provides free access to installed devices. We recommend to use it in 32U R912013 and 42U R912014 RACK cabinets.The assembly panel is made of PA11 aluminum sheet (1.5 mm thick) with size of 200 x 530 mm. The panel has four mounting holes with 6 mm diameter (180 x 120 mm spacing) dedicated for Terra multiswitches MV-532L R70732, MV-932L R70882. The kit includes four M5x10 machine screws with nuts. In the case of using other multiswitches, one has to drill the appropriate holes.The ZMB panels should be mounted with 70 - 150 mm vertical spacing (so, the modules should be installed every 6U - 8U) in order to ensure good wiring conditions. For example, a 32-output multiswitch for two satellite positions needs as many as 41 cable connections, and the minimum bending radius of the TRISET-113 E1015_500 cable is 35 mm (in the case of such fixed connections).Mounting the ZMB-1-800 panelThe ZMB-1-800 assembly carrying a multiswitch, mounted to RACK railsThe ZMB-1-800 R77105 side assembly is pre-assembled, the angle brackets are attached to the panel with screws. The screw connections should be loosened to adjust the spacing between the brackets so that they match the span of the front and rear rail of the cabinet. The assembly provides 22 mm adjustment range. The maximum span is 570 mm, which corresponds with the maximum span of the front and rear RACK rails in a standing cabinet with a depth of 800 mm. The brackets should be screwed to the RACK rails at the selected level of the cabinet, using the caged nuts included in the ZMB set.The RACK board vertical assembly system is ideal for installing multiswitches, signal amplifiers, splitters etc. in RACK cabinets. The elements of the multiswitch system mounted on ZMB-1-800 panels located on the sides of the cabinet can feed up to 256 subscriber outlets. The set includes M5x10 screws and nuts needed for mounting the multiswitch to the side assembly component.The ZMB assembly component can be used in a RACK cabinet only with the ZMC front assembly components. The components have been specially designed to fit with each other.Main features of the RACK board vertical mounting system: Predefined installation sets for individual equipment configurations enable simple and quick assembly. RACK board mounting panels allow for installing the equipment items and cables so that the components are placed in a clear and aesthetic way. The highly professional solution ensures that the longer cables are hidden in the middle part of the cabinet, whereas the connections and the devices are easily available (in opposite to placing such devices horizontally). This improves the equipment cooling and facilitates measurement and adjustment procedures. The RACK board system is a universal solution - originally dedicated for Terra equipment, it can be easily adopted for use in GSM (repeaters), network (routers and switches) and other applications. Because every device in the RACK board system is placed vertically and it does not adhere to any other device or element of the RACK cabinet, it is naturally cooled by the air circulation inside the cabinet. Each device has its own mounting panel and the spaces between devices allow for easy wiring. Hardware components of RACK board system: ZMB series - side assembly components for installing on the side surfaces of large standing cabinets. Currently, we offer panels for mounting in 800 x 600 cabinets. ZMC series - front assembly components that can be installed together with ZMB panels. ZMD series - front assembly components for hanging or standing cabinets (cannot be used with ZMB series due to 19'' width). With the RACK board system the installer can make use not only of the front of a RACK cabinet (rails with 19" spacing) but also of the side spaces - the access to those devices is obtained by dismantling side walls of the RACK. The ZMB side assembly is mounted (on the left and/or right side) to the front and rear RACK rail. Currently we offer the ZMB-1-800 assembly for 600x800 mm standing RACK cabinets. The installer can use ZMC front-mount assemblies in several versions. They allow for installing in t