DVR auto 8 canale Hikvision DS-7108HQHI-K1 (8x1080p, H.265, 15 fps, 1xSATA, GPS, 4G, PoE)

Key features:Video and audio recording: 8 × AHD up to 1080p and 1 × IP up to 1080p (1 × RJ-45) at 15 fps, and CVBS 960H or lower at 25 fpssupports a 2.5" HDD with a capacity of up to 2 TB or a 2.5" SSD with a capacity of up to 8 TB (1 slot)built-in 4G LTE communication module, SIM card slot and external antennabuilt-in GPS module with external antennawide power supply voltage range for the recorder: 8–36 V DC; power outputs for 4 AHD camerasbuilt-in UPS enabling recording to continue for up to 8 seconds after a power failure, ensuring data protectionrecording starts automatically when power is connectedautomatic hard disk heating enabling recording to start at temperatures as low as −40°Cvibration- and shock-resistant design, compliant with the MIL-STD-810G military standardOperating temperature range from −40°C to +80°Cbuilt-in 3-axis accelerometer (G-sensor) and 3-axis gyroscope, enabling the detection of, amongst other things, sudden acceleration, braking, collisions and sudden changes in directionThe Protect 210 M80210 is an 8-channel mobile recorder designed for use in coaches, city buses, minibuses, trams, the underground, company and private cars, and special-purpose vehicles, such as TIR lorries, police cars, prison or military vehicles, and ambulances. Its design ensures enhanced resistance to vibrations and shocks.The DVR is designed to be mounted inside the cab of a vehicle, e.g. under the seat, in a glove compartment etc. The power cables have to be connected to the battery and ignition switch (similar to radio), so that the device automatically begins video and audio recording simultaneously with turning on the ignition. The power circuit is protected by 5 A fuse which protects against excessive current drawing and burning of the wiring in the event of a fault. By default, the recorder runs until the power supply is turned off with the ignition key, unless the delayed turn off function (running for a specified time after switching off) or a schedule function is active. The DVR has also its own power backup and runs for about 8 seconds more to safely save all data.Diagram of the plug for connecting camerasNote: An adapter from M12 to BNC connector is not included. It can be purchased separately - PZ-1 M80106.The Protect 210 has 8 video inputs fitted with M12 connectors. Connecting the cameras allows for the quick and secure transmission of video signals from the cameras, as well as powering the cameras directly from the recorder itself. The recorder enables simultaneous recording from 8 channels at 15 fps for 1080p resolution (25 fps for 720p and lower resolutions). The video quality allows for easy recognition of traffic situations, people’s behaviour, and even faces or number plates. Both AHD and CVBS signals are supported.4G LTE connectivityThe device is fitted with a communications module supporting 4G LTE (FDD-LTE/TDD-LTE) and earlier standards (3G and 2G), along with an antenna that must be installed in the vehicle (a separate SIM card is required). This provides continuous, remote access to live video feeds, recordings, location data, route history, speed and vehicle parameters from the connected sensors. If necessary, the device can create copies of recordings. This requires a server with the IVMS software installed.H.265 compressionThe DVR supports H.265 video compression which, compared to its predecessor (H.264), reduces by half the data stream and the demand for disk space. This allows you to use storage media with half the capacity or store recordings twice as long.GPS module, overload sensor and gyroscope A GPS antenna is included. When connected, the GPS module turns on automatically and details of the speed and device position are included in the video. Simultaneously, data from acceleration and position sensors (gyroscope) reading data in three axes (X, Y and Z) is always recorded. The device can detect a collision, sharp braking, accelerating or cornering too fast.Data archivingRecording of video and audio from the connected cameras is carried out via a single HDD/SDD slot with capacity up to 2 TB. Recordings can be exported to a flash drive or memory card and played back using the included software. The recordings are stored along with the GPS, acceleration and alarm input data in their respective device formats. In addition to searching and playing recordings from cameras, the software enables the use of the additional DVR capabilities including generating a graph of the alarm input activation on a timeline or vehicle position based on the saved GPS coordinates.Integration with vehicle sensorsThe alarm inputs can monitor the vehicle devices plugged into the electrical system. These may include shifting into the reverse, opening the fuel filler door, door closing, seat belt fastening, cargo area opening, brake pressing, indicting etc. Activation of an input can be linked to an alarm action, , e.g. shifting into reverse can display lines on the camera image showing the distance